PVC Bamboo Fiber Decoration Wall Panel
PVC Ceiling Panel Production Line
This line is used to produce PVC bamboo fiber decoration wall panel which used on indoor wall decoration. There are many kinds of pattern for option.
This line can also produce PVC ceiling panel which widely used in inner house ceiling decoration.
MACHINE INTRODUCTION:
This line is used to produce PVC bamboo fiber decoration wall panel which used on indoor wall decoration. There are many kinds of pattern for option.
This line can also produce PVC ceiling panel which widely used in inner house ceiling decoration.
PROUDCTION PROCESS;
According to the didferent formula, should mix the PVC powder with additives in a ratio. After mixing, put the raw material into the extruder by screw feeder. By heating and mixing in extruder, the raw material will change to fluid and extruded into mould. Out of mould, wall panel will be shaped and cooling by platform. Through the tractor, cutting machine, finial end on collect platform for packing. 
EQUIPMENT LIST:
- SJSZ65x132 twin screw extruder
- Wall Panel Extrusion Mould
- Shaping Platform
- Haul-off Machine
- Cutting Machine
- Stacking Platform
Auxiliary Machine:
- SWP400 Crusher
- 300/600 Mixer
MACHINE TYPE:
Items | YF180 | YF240 | YF300 | YF600 | YF900 |
Max.width of board(mm) | 180 | 240 | 300 | 600 | 900 |
Extruder Model | SJZ55/110 | SJZ65/132 | SJZ80/156 | SJZ92/188 | |
Mian motor power(KW) | 22 | 37 | 55 | 110 | |
Drawing height(mm) | 150 | 150 | 150 | 150 | 150 |
Drawing speed(KN) | 20 | 20 | 20 | 30 | 40 |
Drawing speed(m/s) | 0-5 | 0-5 | 0-5 | 0-3 | 0-2.5 |
Auxiliary equipment sum power(kw) | 35 | 35 | 30 | 30 | 40 |
Cooling water consume(m3/h) | 6 | 6 | 6 | 9 | 12 |
Compression air(Mpa) | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |
EQUIPMENT LIST:
- SJSZ65x132 twin screw extruder
- Wall Panel Extrusion Mould
- Shaping Platform
- Haul-off Machine
- Cutting Machine
- Stacking Platform
Auxiliary Machine:
- SWP400 Crusher
- 300/600 Mixer
MACHINE TYPE:
Items | YF180 | YF240 | YF300 | YF600 | YF900 |
Max.width of board(mm) | 180 | 240 | 300 | 600 | 900 |
Extruder Model | SJZ55/110 | SJZ65/132 | SJZ80/156 | SJZ92/188 | |
Mian motor power(KW) | 22 | 37 | 55 | 110 | |
Drawing height(mm) | 150 | 150 | 150 | 150 | 150 |
Drawing speed(KN) | 20 | 20 | 20 | 30 | 40 |
Drawing speed(m/s) | 0-5 | 0-5 | 0-5 | 0-3 | 0-2.5 |
Auxiliary equipment sum power(kw) | 35 | 35 | 30 | 30 | 40 |
Cooling water consume(m3/h) | 6 | 6 | 6 | 9 | 12 |
Compression air(Mpa) | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |
